Madix Hardware Store displays

Gondola Shelving

Madix Gondola Shelving

Is the main ingredient in all of the displays for a hardware store as all of the displays are configured to mount onto an existing Madix Gondola Shelving Unit.


Madix Nail Bins

Madix Nail Bins

Madix Nut and Bolt Bins

Madix Nut and Bolt Bins

Intended for organizing densely spaced, lightweight products. It offers a 4" high profile and has a 15 degree down-slope.

It can be used for small electrical parts, plastic pipe fittings, trial size items, nuts, bolts, screws, and other parts. Dividers are ordered separately.


Madix Pipe Shelf

Madix Pipe Shelf

Bracket with hardware included for hanging Wire Grid Shelves in Gondola/Wall shelving. Sahara is standard finish.

Madix Lumber Shelf

Madix Lumber Shelf

Rigid, heavy duty for vertically displaying lengths of plastic or metal pipe, conduit, guttering or other similar items. Use two shelves per four foot section.


Casters for Madix Gondolas

Casters for Madix Gondolas

Kit contains four plated casters, two caster channels, and two “Z” stabilizer bars to create a mobile Gondola section. Plated Casters replace the Upright and Base Shoe Levelers. Hardware included.

Maximum load capacity is 600 lbs. and must be evenly distributed on both sides of the Gondola. For safety, kit CANNOT be installed on a wall section.


Madix Mop and Broom Display

Madix Mop and Broom Display

The Mop and Broom Display is composed of two components which should be ordered together. The Bottom Shelf component rests on the Base Shelf of a Wall or Gondola section. It secures to the shelf with wire tabs that insert into the shelf perforations.

The Upper Shelf component mounts into the Standard Uprights. Each unit has five compartments measuring approx. 9 5/8” wide. Available in 20", 22", and 24" depths and 4' width only.


Madix Lawn Mower Shelf

Madix Lawn Mower Shelf

The Wire Grid Lawnmower Shelf hangs at a 30 degree downslope in Madix Gondola/Wall sections. It has a 4” front lip with a 1 1/4” price tag molding attached, offering a full inch for customer supplied signage.

Since the shelf is Wire Grid, shoppers may look under the shelf to examine the undercarriage of mowers. Smaller mowers may fit two per shelf. Larger mowers will only fit one per shelf. Maximum load capacity of Wire Grid Lawnmower Shelf is 150 lbs.


Madix Hyper Maxi

Madix Hyper Maxi

Madix Hypermaxi rack systems add extra storage and strength to an existing wall or gondola island shelving aisles for more storage and for merchandising heavier products. The Madix Hypermaxi is affordable and connects directly to an existing Madix Shelving System.


Madix Shelf Fencing

Madix Shelf Dividers

The solution for maintaining separation of school, office and art supplies. Dividers are 3 3/4" wide x 7 3/4" high x 6 3/4" deep. The dividers clip into front shelf perforations. Minimum product width is 6". End dividers are sold separately and in pairs.


Display Hooks and Tag Holders

Display Hooks and Tag Holders

Display hooks to all types of display shelving or display walls with either pegboard back or a slatwall type finish.

Hardware Store Displays