Store Fixtures
|
Store Fixtures |
800-619-9566 |
A Madix Wall Shelving Section includes one Basic Upright with Cap, one Base Shelf, one Kickplate, one Back Panel and one Top, Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section would also include one Splicer Spanner.
A Madix Shelving Gondola Section includes one Basic Upright with Cap, two Base Shelves, two Kickplates, two Back Panels and one Top, Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section would also include one Splicer Spanner for two piece backs.
Available in 3' and 4' widths, 8" to 30" depths, two and 3 position in either a flat position, 15 degree or 30 degree down slope.
Madix Gondola End Cap
A standard Gondola End Cap is configured using a single sided double back section of gondola type shelving that can be slid up against an existing aisle of shelving. This configuration will provide the most strength and stability.
Product #: WXX-SXX-PH 4.4 stars, based on 89 reviews
|
In Stock |
$157.00 |
Gondola End Display Merchandisers are a great way to create more exposure for products or merchandise that can be possibly slow moving or on sale.
What is the difference between Gondola Store Shelving and Wall? The Gondola shelving is also called Gondola Island Shelving. Using the term island the Gondola Shelving stands in the center of the floor on as a island type product display. The wall shelving is store shelving that is installed against a wall.
The least expensive way to add an end cap to an existing Gondola island is to add a wall section either 36 inches wide or 48 inches wide to meet the specific needs or the particular store
 |
Gondola Heights are
available in:
Choose the Gondola height that best suites your needs as far as visibility and so on. |
||
 |
Gondola Base Depths are
available in:
Choose the Gondola height that best suites your needs as far as visibility and so on. |
|
Backs - Shelving - Uprights - Spanners - Base Shoes and Base Covers |
Gondola Inside Corner
Gondola outside corner sections connect two wall sections that are on the same level and must be equal in size.
Not compatible with Double Sided Island Gondola Sections.
Unique brackets on Standard Upright Side Panels allow part to be used on either side of Inside Corner using Standard Spanners and Back Panels. 4' width only.
INSIDE CORNER SHELVES
Separate bracket design utilizes modified Standard Shelf components to maintain
appearance, strength and easy installation. Shelves do not accommodate
wire or glass binning and may not be used in down slope position. Depths match
all Standard Base and Upper Shelves.
Inside Corner Specifications
To minimize wasted space, the Inside Corner is ideal for maintaining continuity around a corner. The shelf depth is approximately one third less.
As shown in the picture above the inside corner section sits off the corner by 36".
Adjoining shelves must be equal in depth.
Outside Corner
Not compatible with Double Sided Island Gondola Sections.
Gondola corner sections mount into existing Gondola wall section components.
Utilizes space while maintaining continuity around a corner. Shelf depth is approximately one third less than adjoining shelf depths.
Separate bracket utilizes modified standard shelf components to maintain
appearance, strength and simple installation.
Sizes match all Standard Base and Upper Shelves.
Outside available in 90 and 45 degree angles.
Adjoining shelves on the same level MUST BE EQUAL
32204 Castaic Rd P208
Castaic, CA 91384
(800) 619-9566
(661) 254-2228
